Qualifications & Certifications
-2006 Baccalaureate Science (Technical).
– October 2006 – November 2009 University: Mohamed Khaider. Biskra. Algeria.
Certificate: B.Sc. in Metallurgy.
– Course: SNT-TC-1A Level II UT, RT, VT, MT & PT Expiry Date: 15 December 2019
– Course: CSWIP 3.1 welding inspector #91295 Expiry Date: 29 June 2019
– Course: PCN 3.1 L2 UT #325507 Expiry Date: 02 September 2019
– Course: OPITO BOSIET (Basic Off-shore Safety Induction and Emergency Training). Expiry Date: 09 December 2018
Career Summary
January 2013–At the present
Company: BUREAU VERITAS (ALGERIA-GABON-CONGO).
Position: Quality Control (NDT & Welding).
Projects Name:
1- CLOV OFFSHORE DEVELOPMENT PROJECT- GABON CLIENT: SUPSEA7.
2- Line 6” GAS Tchengué-PG2-PORT GENTIL- GABON CLIENT: TOTAL E&P.
3-Construction Water Line 8” – GUINEA ECUATORIAL CLIENT: TOTAL E&P.
4-DJENO TERMINAL (Arrête KITINA)-Pointe Noire- CONGO CLIENT: TOTAL E&P.
5-LITCHENDJILI PROJECT On/Off-Shore- Pointe Noire- CONGO on behalf ENI E&P.
Duties & Responsibilities:
-Prepare/Review Quality Plant, ITP, WPS, PQR, WQT, Project Specification, All NDT Procedures and Drawings.
-Inspection of Welds by: UT (Shear Wave-Lamination-Thickness Measure) MPI, DPI, Radiography According to
AWS D1.1, API-RP-2X, API 1104, ASME B31.3.ASME V
– Planning Radiography testing and interpreting films according to API 1104, ASME B31.3.
-Verify equipment calibration of NDT and welding and Materiel if according to the specification and code.
-Prepare all NDE Reports as UT, PT, MT, RT -Coordinate with client representative on daily basis to resolve any
Quality problems or issues – Inspection of Offshore Structures by UT & MPI as Buoyancy Tank, Spools Sea-Fastening-Module Table, Jacket Legs, Outer/Inner Piles and Crown ring.
– Responsible of: Control Quality, welding, NDT activity.
January 2012- January 2013
Company: SOUTH OCEAN INSPECTION SERVICES –SOIS-
Position: NDT Inspector
Clients: BJSB, HALLIBURTON, ENAFOR – Hassi Massouad – ALGERIA
Project Name: Third Party Inspection Services –Onshore-
Duties & Responsibilities:
-Visual for welding joints -Responsible of NDT activity such MT, PT(Visible& Fluor-escent) for Lifting Point and in surface of pumps equipment (Flange-Tee-Threads) -Coordinate the work with department of Stimulation, Cementation, Fraction to inspect the equipment according the procedure, Client specification -Ultrasonic Thickness Measure UTTM of Piping (Pup Joint, Tee, Flange, Cross, Elbow, X Over, Steel Hose Chiksan Loop) and for Valves (Plug Valve, Safety Valve) -Handling tools inspection in Rig drilling (Manual and Auto tang-elevator-drill pipe) – Periodic Inspection of Lifting equipment (wire rope-slings-Lifting point-chain sling-hook) according Lifts Standard. -Inspect of Silo & Small Water tank by UT, VT
September 2011- November2011
Company: PETROJET
Position: QC Inspector
Client: ANADARKO Ilizi- ALGERIA
Project Name: EL MERK PROJECT Block 208 –Onshore-
Duties & Responsibilities:
Fabrication, Erection, Installation & Commissioning of 6”, 8”, 10”, 12”, 18” Diameter pipeline for water injection and transportation of oil to CPF, Which includes excavation, welding activities
–Visual inspection for all joints according API 1104 20th Ed–Check and verify equipment of welder, electrode, Pipe surface condition & Grade (API 5L X42…X70, material identification, Heat number, dimensional),
JCC (job clearance card) for welders, according plant of construction and WPS -Inspected the Welding Operations SMAW and Ensure approved WPS as well as Qualified welders are available at site. Responsible to Control welding parameters and consumables Before/during/After welding activities- WQT for welder according API 1104
January 2011 – July 2011
Company: JESEM CONSTRUCTION COMPANY
Position: QC Inspector
Client : SAIPEM Hassi Massouad- ALGERIA
Project Name: MLE Block-405 B –Onshore-
Duties & Responsibilities:
Visual inspection of piping in CPF, Manifold -Continuation in the underground lines
(Drainage) in CPF -Application NDT (VT-PT) and continuous NDE -Qualification test for the welder WQT according ASME IX. -Continuation the coating and painting – Preparation daily report of welding production, Welding book, WPQR, RFI and Preparing all NDT document -Preparation of requests and reports for the client and co-ordinate with client responsibilities -Preparation welding folder (Welding book, welding Map, WPQR, RFI ,Reports VT, PT, RT) -Responsible to Verify Fit-up, Fitting, Materials, Electrodes, Weld visual and Dimension
-Inspected the Welding Operations like GMAW, SMAW & GTAW – Carried out repairs according to WPS. Prepare and maintain welding reports, rejection rate – Inspecting the weld joints before/during/after welding. Monitoring the welding parameters & inter pass temperature. Marking of welds on isometric drawings P&ID,
-Recording of completed weld -Responsible to check the method of Pre-heat applied prior to tack weld.
Checked the flow rate of shielding and purging gases.
July 2010– January 2011
Company: PETROJET
Position: QC Inspector
Client: SONATRACH Biskra – ALGERIA
Project Name: GAZODUC GK3 –Onshore-
Duties & Responsibilities
Fabrication, Installation of 48” Material: API 5L X70 in 400 KM, for transportation & storage of Gas -Visual of joint Before/During/After Welding according WPS – Prepare Daily reports of production, Welding Book, Visual Reports -Weekly reports to QA/QC Manger and Supervisor about: Quality of work, Production rate and deficiency of Work -Welder’s Qualification Test WQT according the API 1104
Exposure To Codes & Specifications
Code & Standard: ASME V, IX, B31.3 / API 1104, 5L / AWS D1.1 / API-RP-2X / EN 287.
Client’s Procedure & Specifications: -TOTAL Specification GS-EP-PVV/STR / ENI Specification
-DNV-RP Specification.
-ARH Specification and Regulation Algerian.
