Qualifications
• ISM familiarization and understanding
• ISPS familiarization and understanding
• NDT Level II in MT Method according to ASNT Recommended practice SNT-TC-AI
• NDT Level II in RT Method according to ASNT Recommended practice SNT-TC-AI
• NDT Level II in VT Method according to ASNT Recommended practice SNT-TC-AI
• NDT Level II in UT Method according to ASNT Recommended practice SNT-TC-AI
• Holding NEBOSH certificate (National Examination Board in Occupational Safety and Health) (IGC)
• Holding External Lead Auditor ISO 9001:2008 certificate
• Holding Internal Auditor ISO 9001:14001 certificate
• Holding Internal Auditor OHSAS 18001 certificate
• Personal Survival Techniques, search and rescue (STCW 1978/95)
• Personal Safety and social responsibilities (STCW 1978/95)
• Fire Prevention and fire fighting (STCW 1978/95)
• Medical Emergency basic Training (STCW 1978/95)
Career Summary
May 2008 – Present
IMPRESUB DIVING & MARINE CONTRACTORS
QHSE Manager (Employee)
Responsibilities:
• Conducting Internal Audits according to QMS standard (ISO 9001:2000- 14001-18000)
• Improve and develop QMS + HSE procedures/instruction
• Ensure complete integrity of QMS + HSE at all levels of the company
• Identification of Non Conformances and closure of raised Non Conformances
• Maintain QMS + HSE application at all time
• Prepare and monitor Statistics and reports (Safety Meetings presentations, accidents/near miss reports)
• Prepare project specific HSE requirements
• Monitor company’s HSE performance
• Conform that projects are performed according to specific QHSE requirements
• Update and maintain records of ROV, Diving and Survey according to IMCA Guidelines
• Understand the components of an HSE Management System and assist in its continuing implementation and maintenance.
• Develop, implement and maintain company HSE documents adhering to local, environmental, health and safety regulations. (National and international).
• Develop and review project HSE plans and conduct project assurance activities.
• Conduct incidents investigation in collaboration with interested parties.
• Conduct safety meetings (Tool Box Talks, Job Safety Analysis, etc.)
• Coordinate company and corporate safety/wellness programs.
• Works with internal and external customers to ensure compliance with company HSE guidelines, policies and regulations.
• Support the development of HSE audit programs and leads local / field audits
• Support the Company HSE mentoring programs
• Conduct and support project risk assessments (HAZOP / HAZID)
• Develop Lessens Learn and share results with Senior Management and the Workforce.
• Compile and analyze HSE statistics, incident reports and issue monthly reports.
• Develop corrective actions to address negative trends and near misses.
• Produce leading indicators and statistical data
• Develop HSE training plans and programs
• Prepare HSE training materials and deliver HSE training courses
• Develop supplementary HSE training programs where industry training has proven insufficient.
• Ensure all annual required HSE training is being completed.
• Schedule and coordinate training classes in collaboration with HR and training Manager.
• Update Project manager with all applicable codes, national and international regulations.
• Track (In-House Training) and report on the status of training completed to management.
• Ensure that staff assigned to each project exhibit adequate HSE training and experience.
• Participate in and promote daily toolbox meetings and general safety awareness.
• Ensure employees conduct job safety assessments on every job and that all personnel understand they are not to take risks and must refuse unsafe work (Stop Work).
• Provide direct coaching to improve safety performance and hazard recognition and remediation, provide feedback to supervisors and managers on all local and field audits.
• Coordinate return to duty for injured employees with HR.
• Ensure all aspects of the Hazard Communicated standard are in place (MSDS, Inventory, Training, etc.)
• Provide assistance in implementation of IMCA guidance in Diving,ROV,Marine and survey systems
• Preparation of IMCA Saturation and Air diving self assessment audit
• Code of practice for initial and periodic examination testing and certification of diving plant and equipment (IMCA D 018)
• Code of practice for initial and periodic examination testing and certification of diving plant and equipment (IMCA D 018)
• Diving Equipment Systems Inspection Guidance Note (DESIGN) for surface orientated (air) diving systems (IMCA D 023)
• DESIGN for mobile/portable surface supplied diving systems (IMCA D 040)
• FMEA (Failure Mode Effect Analysis ) of diving systems in collaboration with diving supervisor/superintendent
• Standard ROV audit document (IMCA R 006)
• Preparation of The initial and periodic examination, testing and certification of ROV handling systems (IMCA R 011)
• Design the project safety concept integrating the various project key functions (Diving, ROV, Marine, Lifting, welding……)
• Preparation of safety aspects of involved Dynamic positioning marine units in the project
• Implement the QA/QC management system at site
• Coordinate with quality inspections with all the site sub contractors and vendors coordinate all non destructive testing on site
• Coordinate with the clients representative on all quality matters
• Coordinate all receipt inspections
• Distribute relevant QA/QC documentation to site subcontractors
• Verify that the quality related site activities are in accordance with the applicable codes and standards
• Participate in the site internal and external site audits
• Coordinate all the quality site inspections through the site third part y or internal QC inspectors
• Ensure all quality control documentation is complied and competed for as-built hand over through the QC engineer
• Control all nonconformance reports and undertake remedial action
• Compete site quality control instructions and action remedial responses
• Review the customers specification and undertake relevant training to the site QC inspector
• Monitor the implementation of the approved project QC Plan
• Complete and coordinate the approval of the sites QC technical submittals to the clients
• Coordinate with the project construction manager on all quality issues Coordinate and chair the QA/QC project weekly/monthly meetings with the projects subcontractors QC personnel
• Elaborating inspection and test programs
• Ensure the safety is adhered to at site
• Assure all technical documents relative to site quality control are current status
• Familiar with International standards ASME, API, ASTM,ASNT
Additional responsibilities:
• NDT Supervisor
• Perform audits according to IMCA CMID (Common Marine Inspection Document)
• Company designated person for Marine Operations
• Offshore Party Chief (Specific NDT Projects)
March 2008 – May 2008
TYCO TELECOMMUNICATIONS
In Country Assistant Project Manager (As contractor)
Responsibilities:
• Co-ordinate project time frame
• Follow up project progress and stages compared to original progress plan
• Assist in obtaining all relevant local permits and assist site visits
• Co-ordination with Local Authorities
January 2005 – December 2007
REGISTRO ITALIANO NAVALE GROUP-RINA EGYPT
QHSE Auditor/controller (Employee)
Responsibilities:
• Liaise with ship-owners to implement ISM system for Company (Document Of Compliance) and Safety management systems onboard including procedures
• Conducting Internal Audits according to specific schemes
• Maintenance of QMS internal application
• QMS auditor according to ISO 9001 – 2000 standard
• QMS auditor according to ISO 14001
• QMS auditor according to OHS 18000 standard
•Performing second party audits according to the client’s own Safety/Quality requirements
•Perform an analysis risk assessment according to nature of the audit and according to the occurrences of the error if any
•QA/QC activities during platforms maintenance and during sea line installation/services
Projects:
-Darfeel: 18” pipe lay from Darfeel P/F to Semman P/F – Client PETROBEL/ENI
-Intersinai: 36” pipe line crossing – client: PETROBEL/ENI
-F10 Clamp marine installation – Client: PETROBEL/ENI
-West Shukier P/F Revamping – Client: West Shukier Petroleum company
Additional Responsibilities:
•An external monitor for LS& Co. YW safety requirements
•An approved auditor according to Italian Legislation 231 for Administrative responsibility
•Conducting Social Audits according to WRAP certification (SA 8000)
• Conducting Social Audits according to BSCI certification (SA 8000)
• Conducting Social Audits according to Ethical Codes (SA 8000)
May 2000 – December 2004
REGISTRO ITALIANO NAVALE GROUP-RINA EGYPT
In country Project Co-ordinator (Employee)
Responsibilities:
– Local Project coordinator of third party Certifying authority
-Development activities in Middle East
– Conducting weekly/monthly meetings with clients, vendors and subcontractors
– Determining resources required
-Contracts Review
-Contractors and subcontractors qualifications and approval
-Preparation of project budget (Cost Related only)
-Foreign Offices Assistance
