WORK EXPERIENCES :
LEIGHTON Contractor Philippines, Inc. : (May 2014 ~ Present)
COMPANY : LEIGHTON Contractor Philippines Inc.
A. Job Position : QA/QC Manager
B. Project : P1120 Therma South Energy Unit 1&2 Project
C. Location : Toril, Davao City
D. Plant Owner : Aboitez
E. Duration : May 2014 ~ present
JGC Philippines, Inc. (February 1992 ~ December 2012)
COMPANY : JGC PHILIPPINES
A. Job Position : QA/QC Manager
B. Project : C3/C4 Storage Project
C. Location : Brgy. Simlong, Batangas City
D. Plant Owner : JG Summit Petrochemical Corp.
E. Duration : July 2012 ~ December 2012
COMPANY : JGC PHILIPPINES
A. Job Position : Lead QC Inspector Night Shift
B. Project : JMaint Shutdown Project
C. Location : Rio Tuba -Palawan
D. Plant Owner : CBNC
E. Duration : April 2012 ~ June 2012
COMPANY : JGC PHILIPPINES
A. Job Position : QC Manager
B. Project : IBEC Project
C. Location : Isabela, Tuguegarao
D. Plant Owner : GFII
E. Duration : January2012 ~ February 2012
COMPANY : JGC PHILIPPINES
A. Job Position : Deputy QC Manager
B. Project : NCP Project
C. Location : Jubail-Saudi Arabia
D. Plant Owner : CHEVRON
E. Duration : July 2009 ~ July 2011
COMPANY : JGC PHILIPPINES
A. Job Position : QA/QC Manager
B. Project : CBNH-2 Project
C. Location : JPHIL MOC – Philippines
D. Plant Owner : Coral Bay Nickel Corporation
E. Duration : May 2007 ~ May 2009
COMPANY : JGC PHILIPPINES
A. Job Position : Lead QA/QC Welding Engineer
B. Project : CBNH-2 Project
C. Location : YOC-Japan & JPHIL – Philippines
D. Plant Owner : Coral Bay Nickel Corporation
E. Duration : June 2006 ~ March 2007
COMPANY : JGC CORPORATION
A. Job Position : Deputy Field QC Manager ( After Resumption )
B. Project : JGC – Tuban Petrochemical Project
C. Location : Tuban, East Java, Indonesia
D. Plant Owner : TPPI Co.
E. Duration : September 2003 ~ May 2006
COMPANY : JGC CORPORATION
A. Job Position : Lead QC Inspector (Mechanical/Welding)
B. Project : JGC / INITEC – Oil Exploration Project
C. Location : Ourhoud, Algeria
D. Plant Owner : OURHOUD ORGANIZATION
E. Duration : February 2002 ~ April 2003
COMPANY : JGC CORPORATION
A. Job Position : Lead QC Welding Engineer (After Resumption)
B. Project : JGC-Thai Paraxylene Project
C. Location : Sriracha, Chonburi, Thailand
D. Plant Owner : Thaioil Co.
E. Duration : November 2000 ~ July 2001
COMPANY : JGC CORPORATION
A. Job Position : Deputy Field QC Manager
B. Project : JGC/NIKFILL Bataan Polyethylene Project
C. Location : Bataan, Philippines
D. Plant Owner : BPC Co.
E. Duration : January 1999 ~ October 2000
COMPANY : JGC CORPORATION
A. Job Position : Lead QC Welding Engineer (Before Suspension)
B. Project : JGC-Thai Paraxylene Project
C. Location : Sriracha, Chonburi, Thailand
D. Plant Owner : Thaioil Co.
E. Duration : March 1998 ~ December 1998
COMPANY : JGC CORPORATION
A. Job Position : Deputy Field QC Manager (Before Suspension)
B. Project : JGC – Tuban Petrochemical Project
C. Location : Tuban, East Java, Indonesia
D. Plant Owner : TPPI Co.
E. Duration : June 1997 ~ February 1998
COMPANY : JGC CORPORATION
A. Job Position : Field QC Manager
B. Project : JGC/NIKFILL-Toyota Motor Phil. Project
C. Location : Sta. Rosa, Laguna, Philippines
D. Plant Owner : TMP Co.
E. Duration : April 1996 ~ June 1997
COMPANY : JGC CORPORATION
A. Job Position : Field QC Welding Inspector
B. Project : JGC STAR- Caltex Project
C. Location : Map Ta Phut, Rayong, Thailand
D. Plant Owner : CALTEX
E. Duration : April 1995 ~ March 1996
COMPANY : JGC CORPORATION
A. Job Position : Field QC Welding Engineer
B. Project : JGC EXOR-I Project
C. Location : Balongan, West Java, Indonesia
D. Plant Owner : PERTAMINA
E. Duration : February 1992 ~ March 1995
Other Company. ( September 1981~ December 1991 )
COMPANY : MS AL Suwaidi General Const. Group
A. Job Position : Deputy QC Manager
B. Project : MS AL Suwaidi General Const. Group
C. Location : Rastanura, Saudi Arabia
D. Plant Owner : Al Suwaidi
E. Duration : September 1990 ~ December 1991
COMPANY : SEMBAWANG MARITIME LTD.
A. Job Position : QC Welding Engineer
B. Project : ACT Huizhou-21-1 Platform Project (Offshore)
C. Location : Shekou,China
D. Plant Owner : SEMBAWANG MARITIME LTD.
E. Duration : April 1990 ~ July 1990
COMPANY : ATLANTIC GULF & PACIFIC CO.
A. Job Position : Field QC Engineer
B. Project : AG&P-Unocal Erawan Compressor Platform
Project (Offshore)
C. Location : AG&P BMFY, Bauan, Batangas, Philippines
D. Plant Owner : UNOCAL
E. Duration : October 1989 ~ April 1990
COMPANY : ATLANTIC GULF & PACIFIC CO.
A. Job Position : Field QC Welding Engineer
B. Project : AG&P Cominco Alaska Red Dog Project
C. Location : AG&P BMFY, Bauan, Batangas , Philippines
D. Plant Owner : PARSONS Co.
E. Duration : June 1988 ~ September 1989
COMPANY : ATLANTIC GULF & PACIFIC CO.
A. Job Position : Welding Foreman
B. Project : JGC/AG&P- KNPC Project
C. Location : Fahaheel, Ahmadi, Kuwait
D. Plant Owner : KNPC
E. Duration : March 1983 ~ March 1986
COMPANY : ATLANTIC GULF & PACIFIC CO.
A. Job Position : QC Engineer
B. Project : AG&P NPC Coal-Fired Thermal Plant Project
C. Location : Calaca, Batangas, Philippines
D. Plant Owner : National Power Corporation
E. Duration : September 1982 ~ March 1983
COMPANY : ATLANTIC GULF & PACIFIC CO.
A. Job Position : Field Engineer
B. Project : AG&P Ferrochrome Project
C. Location : Tagolo-an, Misamis Oriental, Philippines
D. Plant Owner : FERROCHROME Philippines
E. Duration : September 1981 September 1982
JOB DESCRIPTION :
32 years experience in Quality Assurance / Quality Control Management and Inspections.
• Over all responsibility of Quality Assurance/Quality Control activities in the project and report to corporate Team Management in a project execution organization.
• Ensure that general project procedures are verified in accordance with the planned times and responsibilities assigned in the Project Quality Plan (PQP).
• Review Vendor’s document based from the summary list of requisition and issues Inspection Release Certificate (IRC) during procurement of equipment stage .
• Drafting Quality control procedures and instruction based from Vendor’s document submitted.
• Attend Kick off meeting and conduct Pre- inspection meeting prior to start the fabrication and field work and to conduct weekly meeting with sub contractor.
• Prepares and established Method Statement and Inspection and Test Plans (ITP) in LEIGHTON construction project.
• Conduct lecture and training about Basic Welding Technology at LEIGHTON project site in Toril, Davao City, Philippines.
• Conduct QMS Audit in all discipline and subcontractors in the project.
• Arrange inspection schedule outside project site such as in Davao fabrication shop and Manila supplier and vendor fabrication shop.
• Conduct shop and site inspection based from the Vendor submitted Inspection and Test Plan (ITP).
• Monitors daily inspection and testing activities and to issue Request for Inspection (RFI).
• Review and evaluates authenticity of Material mill certificates and confirms if such is a certified true copy.
• Checks and reviews completeness and accuracy of MDR and control.
• Keeps and control all quality record for safety in ventilated room.
• Witness WPS/PQR and Welders pre-qualification test.
• Hands–on technical experience in Non-Destructive Testing (NDT), and in preparation of Welding Procedure and Specification (WPS) and Procedure Qualification Records (PQR)
• Witness all Non- destructive and Destructive testing of materials.
• To issue NCR for non- conforming items and Corrective Action (CAR) activities and monitors the closed out.
• Conduct inspection of the following: welding of piping, pipeline, tanks, equipment, structural steel welding fabrication, erection and installation works in field construction of Oil Refineries, Petrochemicals, Coal Fired Thermal Power Plant, Ferrochrome Plant, Paraxylene, Polyethylene and Offshore projects.
• Prepares project Field Quality Control procedures namely, Inspection Coordination Procedure with the Client, Shop inspection Coordination Procedure with Vendor, Inspection Coordination Procedure with Subcontractor.
• Arrange and invite government inspector to witness inspection activities at fabrication shop or at site.
• Monitor and check JGC QC Construction Management Systems (CMS) in welding data encoding and NDE data encoding and prepare output data reports daily and weekly basis.
• Review of RT films test result, Interpret Dye Penetrant test result and Magnetic Particle test report.
• Conduct Line Check order of piping and pipeline and witness hydrotest and pneumatic testing.
• Conduct Visual inspection of weldment in piping and pipeline either in fabrication shop or at project site.
• Conduct inspection or witness the equipments erection and installations of internal trays and box-up.
• In charge for hand over of QA/QC documents to client after completion of the project.
• Conduct in house lecture and training about Basic Welding Technology at JGC Manila Operation Center (MOC) in Alabang, Manila, Philippines.
• Computer literate such as: Microsoft office like Words, Excels and Windows 7.
PROFESSIONAL DEVELOPMENT :
* AG&P Construction Supervisors Training Program
* KNPC Welding Seminar
* AG&P-N.D.T. Seminar in Radiography Test, Penetrant Test and Magnetic Particle Test
* PWS Seminar in Boiler and Pressure Vessel Code ASME VIII – Div.I
* PWS Seminar in Setting Up of a Quality System for ASME Accreditation
* PWS Seminar in Welding Together Dissimilar Metals – Problems and Solutions
* PWS Seminar in Modern Cutting Technology for Fabrication and Construction Industry
* TIC – Principle Empowered Effectiveness Program
* TIC – Total Quality Management Awareness Program
* Basic Welding Technology
* JPHIL – Quality Awareness and Quality Systems
* Seminar of ASNT SNT-TC-1A for Radiographic Testing – Level II
* Seminar of ASNT SNT-TC-1A for Magnetic Particle Testing – Level II
* Seminar of ASNT SNT-TC-1A for Liquid Penetrant Tesing – Level II
* PWS Technical Seminar on Achieving Welding Excellence Using 4-Modality of NDT
* PWS Technical Seminar on Mechanical Testing of Welds
* PWS Technical Seminar on Introduction of Titanium and it’s Alloy
* Seminar of Japan Welding Engineer Society (JWES)
* TSI-BVL Commissioning Lock-Out Tag Out Safety Training
* BVL Strive For Life Frontline Safety Leadership Training
MEMBERSHIP / LICENSURE :
* Philippine Society for Non-Destructive Testing ( PSNT )
* American Welding Society ( AWS ) ID # 932408
* Philippine Welding Society ( PWS ) ID # 1- 96 –1265
* Associate Certified Welding Inspector ( PWS ) ID # 96-A000021
* Certified ASNT SNT-TC-1A for Radiographic Testing – Level II
* Certified ASNT SNT-TC-1A for Magnetic Particle Testing – Level II
* Certified ASNT SNT-TC-1A for Liquid Penetrant Testing – Level II
* Certified Radiographic Film Interpretation ASNT SNT-TC-1A – Level II
