Experience Details :-
U.A.E : Sr.Instrumentation and Control System Engineer,
M/S Euro Control Projects Abu Dhabi (ZADCO-Abu Dhabi)
Oman : Instrument Commissioning Engineer,M/S ORION
Engineering U.K(Qarn Alam Steam Project-PDO)
Oman : SeniorCommissioning Engineer,M/S vMoniotor
Inc,Muscat (PDO/OGC/EPC Projects)
Saudi Arabia(K.S.A) : System Engineer, M/S JAL International, Al-Khobar
(Saudi aramco/Saudi electric Company/EPC SCADA and Automation Projects )
India : System Engineer, M/S sitra Infotech, Hyderabad (JLPL/BSES/Central Railways Traction Power SCADA Projects)
Academic Qualification
Master of Science in Computer Science from BharathiDasan University, Tiruchirapalli April’2000.
Bachelor of Science in Computer Science from Nagarjuna University, Guntur April’1996.
Technical Skills:
Self-motivated, able to work within a team and possess good communication skills.
My experience is in field instrumentation, DCS, SCADA, PLC and Fire and Gas Systems, which include loops/Logic/C&E’s functional testing and start up.
DCS, ESD and PLC systems configuration and functional testing for controls and safeguarding applications. FAT and SAT for different packages and systems.
Planning and execution of a safe and flawless commissioning and start-up of the project facilities till handover to Operations Team. Good knowledge in pre-commissioning, commissioning and handover of systems, Sub-systems and facilities.
• Ensure that the commissioning and start-up of the project facilities are conducted in
accordance with the established procedures
• Coordinate with the construction for pre-commissioning and mechanical completion
Phases ensuring that Systems are handed over for commissioning.
• Communicate and cooperate with project team members, asset team
• Ensure that the Operations team to witness and accept pre-commissioning/
commissioning activities in accordance with the agreed procedures.
• Ensure that systems are checked for conformance with PEFS’s and punch list issued
as necessary. Ensure that necessary tests are carried out to prove the facilities and
ensure that they meet with the project specifications.
• Review and comments the technical proposal of method statement, procedures,
testing & calibration reports and pre-commissioning plan. Inspection to ensure
design integrity is maintained during construction and also the project standards
are followed during testing and commissioning.
• Review and approval of all field engineering changes and as built mark-up. Vendor
co-ordination and follow-up for material and technical issues.
Trainings:
vMonitor Product Training at vM Training Centre Abu Dhabi and Muscat.
Field Ware and Shurooq Training in PDO MAF Muscat, Oman.
GE Product Training at JAL International Al-Khobar, K.S.A.
GE Product Training at Sitra InfoTech Hyderabad, India
ABB Products and HMI Training at ABB Training Center Bangalore, India.
Safety Training for H2S, HSE Job Hazard Analysis at Safety Training Institute Muscat.
PDO Safety Trainings (PTW, STOP, GAS Test, Permit Holder and Permit Applicant Etc).
Computer Proficiency:
• Programming Languages : C ,SQL,MS-OFFICE
• RDBMS : Oracle8, MS-Access.
• Operating Systems : Sun Solaris, Windows NT, Windows 98.
• Object Oriented Programming : C ,C++,JAVA,OPC
• GUI : VB6.0, Developer 2000.
• Web Technologies : HTML,JavaScript,VB Script,ASP,XML and EJB
Hardware:
• D20 RTUs (GE Harris),D200 FEP (Front End Processor),D25 (B.C.U) RTUs (GE Harris),GE Fanuc PLCs (90/30 , 90/70 & Micro),VMBUS XS/X8/XC/XG(VMonitor Inc),SixNet RTUs, I/O Modules & All Types of Switches, SPIDER RTUs(ABB),TCP/IP Enabled ,LAN,WAN Devices, Communication Modems, Routers, Switched and Fiber Optic Converters, Protection Relays (Siemens, ABB, SEL and Ge Multilin )
• All Types of Third Party Devices like Schlumburger, Baker, Wood group, Center Lift ESP Controllers, FSDs, VSDs, Redeye, Altus NOC, DNOC & DHGs like Phoenix, Well Lift etc.
• All Type of Field Instruments like (Hart and Foundation Field Bus) Transmitters and Control Valves, MSV (Multi Selector Valves)
• All Types of Radio Communications like Spread Spectrum (2.4GHz, 5.8GHz)/UHF and Other latest Technologies, All Types of GSM Technologies with SCADA Systems and RTUs,Windows NT servers, Windows 2000 servers
• All types for security systems like Closed circuit television(CCTV), Access Control, Intrusion detection System(IDS)for the Oil & Gas, Refinery, and Petrochemical Industries
Comm. Protocol Skills:
• Very familiar with the Modbus Protocol Frames and Etc.
• Very familiar with the UCMP Protocol Frames (This Protocol is prop. for the vM)
• Knowledge of the different types of Communications (RS-232/RS-485/TCP and wireless devices.)
SCADA and PLC Software’s:
• Config pro (GE Harris),Power link Advantage, Simplicity & Visual Substation
• Micro SCADA(ABB HMI),XA/21 (GE Harris),SCADA Software and Hardware
• Path loss Software
• VMField View S/W,SixNet I/O Toolkit S/W,Total Access S/W,Vijeo Citect HMI
• Different Application software’s for Power and Oil SCADA/DCS.
• Matrikon OPC, OPC Mirror.
• Allen Bradley Micrologix 1500
• Rockwell Control Logix 5000
• Allen Bradley Panel View 550 Touch Screen
• IECC 6131 Programming Language.
DCS Systems:
• Emerson DeltaV 10.3
• Honeywell C300
• Yokogawa CS3000
Employment History:
Company Name: Zakum Development Company (Through Euro Controle Projects, Abu Dhabi)
Start Date : Feb’14 to Till Date.
Position : Sr.Instrument and Control System Engineer.
Water Injection Project (WIP):
Responsibilities:
Involve the Design, Engineering, Construction, review, FAT & SAT
Commissioning the Systems.
Verify the Systems requirements as per the Project Specifications.
Provide the Coordination with different vendors.
Perform the Cause & Effect testing throughout facility prior to start-up.
Provide the support different systems Communications to the PLC/DCS/SCADA.
Involve the Interfaces with the different Systems to the main Control System.
Company Name: Petroleum Development of Oman (Through Orion Engineering, UK)
Start Date : December’10 to Dec’2013.
Position : Instrument Commissioning Engineer.
Qarn Alam Steam Project (QASP):
PDO intends to increase the oil production, at the Qarn Alam Oilfield to 10000 m3/day (60000TPD) by injecting steam into the reservoir at the rate of 18000TPD.
This project contains of the off plot (well heads) and on plot (Plant Area).
The Off Plot facilities comprise of flow line from the wellheads to the On Plot facilities including MSVs on the downstream.
In Off Plot Following systems are included Hydrocarbon Gathering System (HGS), Aquifier Pump off System (APO), Raw Water Supply Wells (RWS), Steam Injection Wells (SIW) and Manifolds, Produced Water Disposal Wells (PWDWD), Waste Water Disposal Wells (WWDWD) & Shallow Water Disposal Wells (SWDWD).
Plant area consists two sub divisions (Oil & Gas, Water & Steam).
Responsibilities:
Commissioning of the control systems and F & G systems.
Provide the required support for the Commissioning team members.
Verify the Systems requirements as per the Project Specifications.
Provide the Coordination with different vendors.
Perform the Cause & Effect testing throughout facility prior to start-up in Plant area and well head areas.
Provide the support different systems Communications to the PLC/DCS/SCADA.
Involve the Interfaces with the different Systems to the main Control System.
Coordination between the On Plot Systems to the off plot Systems.
Involve the F & G system commissioning activities.
Involved the Commissioning activities for the Security systems like Closed Circuit Television (CCTV), Access Control Systems and Intrusion Detection System (IDS).
Involve the project final documents approval process.
Company Name : vMonitor LLC, Oman
Start Date : April’06 to November’10.
Position : Senior Commissioning Engineer.
Responsibilities:
PDO OMAN’s Commissioning & Operations Works Designing, Testing, Configuration, Troubleshooting of Wireless RTU’s for Water Disposable Wells, Gas-Lift Wells, Electrical Submersible Pump Lift Wells, Water Injection Wells & MSV’s
Programming PLC, developing Logic & SCADA/ HMI of various OGC Projects & PDO Projects.
System Integration with Schlumburger, Baker, Wood group, Red Eye, Altus NOC, DNOCs,Phoenix etc., brand of Field Instruments / control systems including FSDs,VSDs and ESP Controllers through Modbus Protocol
Commissioning Saih Rawl and Saih Nihayda LNG Wells, Communicating & Transferring the Wet Gas parameters to Foxboro/ Yokogawa/Emerson/Honey well DCS through Fiber Optic/Ethernet devices.
QA/QC Testing of RTU Panels and RTU Firmware Co-ordination with PDO and 3rd party personals for evaluation of requirement.
Conducting Factory and Site Acceptance tests for the systems.
Preparing the Technical & Commercial Documents for the Projects and as well the Bidding Purpose.
Prepare the BOMs based on the Project requirements, attend the Technical meetings for the technical clarifications and feature projects.
Conducting the trainings and seminars for the customers and as well as the company employees for the new technologies.
Support Customers are PDO, OGC, OXY and other local EPC Customers.
Company Name : JAL International Al-Khobar, K.S.A
Start Date : February’04 to March’06.
Position : Systems Engineer.
Responsibilities : JAL International had V.A.R agreement with GE Energy Services
Inc, CANADA.
Designing of the SCADA system for Substation Automation and Oil and GAS Plants.
Hardware and software configuration of the RTUs and FEPs, Analyzing Real time system problems, Configuration of HMIs, Coding and Quality Assurance.
Customer interactions, Conducting Training Courses.
Conducting Factory Acceptance Test at Factory.
Troubleshooting and maintenance of the SCADA system at site.
Commissioning of RTUs and integrating the RTUs with Master stations and integrating the third party devices to collect the Data from them.
Support Customers are Saudi Aramco and Saudi electricity Customers.
Company Name: Sitra InfoTech Pvt. Hyderabad, India.
Start Date : April’00 to Jan’04.
Position : Systems Engineer.
Responsibilities:
The following Projects were executed as a Team Leader for the Team.
JAMNAGAR-LONI (JLPL) Multi-Product Pipeline SCADA Project in India:
In this project 100 RTUs are located along the pipeline on different stations from Jamnagar to Loni which is around 1286km Pipeline in Three Phases. Each RTU will collect the data like Pump status, Pump speeds, Gas flow, and Section and discharge pressures. RTUs will send data to the Master station which is located at Jamnagar and Loni by using CISCO Routers Technology. Master will control the MOVs (Motor Operated Valves) Pump status and Speed (rpm) of the Pumps. Here the RTUs are communicating with Master Station on DNP Protocol.
The system is Client & Server configuration. Here the servers collect the data from all RTUs and it will update the data whenever the clients request.
BSES Power SCADA Mumbai Project in India:
In this project RTUs (D25), FEPs (D200) are configured by using ConfigPro software and MMI (Man Machine Interface) is developed in Power link (GE Harris Product). Here RTU’s are communicating on Serial with FEP by using DNP3.0 Protocol (Distributed Network Protocol). FEP also acquires data from Protection devices (Numerical Relays-ABB) on Fiber Optic Network by using IEC 870-5-103 Protocol. FEP will send data to ZCC and MCC on IEC 870-5-101 Protocol.
Central Railways Traction Power SCADA System-Mumbai Project in India:
This system was developed to acquire Data from RTU’s which are Installed in different Substations. Here the RTU’s are Collecting data from Different Feeders and sends data to MCC (Master Control Center) on Microwave by using Indactic 33 Protocol. In MCC, FEP (Front End Processor) receives the RTU’s data and sends to the Base System & Base System updates the data all Workstations. Here we are using Standby FEP and Base System for Redundancy. Whenever the one Base System or FEP fails automatically switch over the stand by system.
