WORK EXPERIENCE
Aircraft Mechanic – Base Maintenance/Gas Turbine Engine Shop Facility
Qatar Airways, Hamad International Airport, Doha Qatar
June 2014 – Present
• Perform hangar base maintenance on Gas Turbine Engines GE90, GEnx, GP7200, CF6-80, V2500, RB211 Trent 500/700. Carry out servicing, Fan Blades Inspection/Replacement/Re-lube, Fan Case Mating/Splitting, replacement and installation of components such as pneumatic valve/pipe, starter, starter duct/valve, hydraulic/engine driven pump, fuel/oil pump, oil/fuel filter, variable frequency generator, exhaust tail cone/plug, anti-ice pipe/valve in accordance with the latest revision of aircraft maintenance manual.
• Perform Receive-in inspection inventory check and dispatch as per Aircraft Maintenance Manual.
• Assist Engineer in borescope inspection on gas turbine engine compressors and turbines.
Assembly Technician – RB211 Trent 900/1000 Gas Turbine Engine
Rolls-Royce Singapore Pte Ltd, 6 Seletar Aerospace Rise Singapore 797575
February 2011 – April 2014
Perform assembly tasks of brand new Gas turbine Engine RB211 Trent900/1000 in line with work Instructions and Engineering Drawing such as jointing of Intermediate Pressure Compressor to Intermediate Case Stub Shaft, Fan shaft to Intermediate Pressure Compressor, High Pressure Compressor to Intermediate Case Stub Shaft, Intermediate Pressure Turbine to High Pressure Compressor, Low Pressure Turbine to Intermediate Pressure Turbine by using overhead crane, fixture and special tooling.
Carry out installation of Main Gearbox, bleed valves/solenoid, igniters, sensors, thermocouples, cooling manifolds/tubes/pipes/ducts, Fuel/oil filter, brackets and harnesses in accordance with the fitting instruction, arrangement and engineering drawing.
Perform full strip and re-build for Return to Shop Engine (Failed Test) in accordance with Assembly Control Record and Manufacturing Execution System.
Raised non-conformances on quality/build issues in assembly line and carry out self-inspection and over check-inspection tasks.
Carry out Training for new or existing technicians in the build line in accordance with engineering drawing, Installation Instruction and arrangement drawing respectively and lead the team at all time in performing the daily task.
Perform general workshop housekeeping activities before and after the shift.
Awarded as Best Trainee on first Cohort Technician.
Set up and organize shop floor/workstation in Regional Training Center workshop and Engine Assembly Line in accordance with Rolls-Royce Production System.
Participate in Continuous Improvement Projects, HS&E activities in the workshop and problem solving using tools such as ISHIKAWA, FMEA, DMAIC.
Involved in simulation and actual production of the first RB211 T900 Gas Turbine Engine.
June 03 – August 30, 2013, Attached to Certification Office to help Engineer for assembly administrative duties such as; Engine build/test documents vetting, engine module serials verification, Certificate of Conformance and EASA Form 1 verification, engine modules configuration verification in Manufacturing Execution System, Concession and Non-conformance, communicate with inter-department team for documents discrepancies, Assist Engineer for Final engine release documents.
Technician/Inspector – PW4000-112”, 100”& 94” and JT9D Gas Turbine Engine
Eagle Services Asia Pte Ltd, Pratt & Whitney/Singapore Engineering Company
Engine Overhaul Complex, 51 Calshot Road Singapore 509927
February 2006 – January 2011
Worked as a Certifying Technician to release parts back to assembly line as serviceable in accordance with Authorize Release Certificate such as EASA, FAA, CAAS and relevant approved documentation.
Perform removal/Installation, visual and dimensional inspection on No.1 Bearing Front and Rear Support, High Pressure Compressor module shaft retaining nut and spacer, and Low Pressure Compressor fourth stage stator In Accordance with latest revision of engine manual.
Perform removal/Installation, visual inspection on first stage Low Pressure Compressor Fan Blades, Fan Fairing-Exit, Cone Segment Assembly, Ducts, Hoses, Tubes and Brackets as per Cleaning Inspection Repair Manual and Engine manual.
Monitor Service Bulletin for Modification Call-Up compliance as per engine work scope and customer requirements.
Create Service Management Order under System Application Products transaction for IR (Internal Repair) parts to their respective in-house repair departments and send overhauled parts out-house under vendor code through SAP transaction.
Release parts back to assembly line as new, serviceable, inspected, repaired and overhauled in accordance with customer requirements, engine work scope, approved documentation and Authorized Released Certificate.
Trained new technician in daily inspection task as per Engine manual, Cleaning Inspection Repair Manual and Illustrated Parts Catalogue accordingly with the latest revision.
Perform daily housekeeping and check tooling checklist inventory for calibration monitoring.
Continuous Improvement KAIZEN team member.
Involved in Health Safety & Environment activities in the workshop.
Certifying Technician Approval obtained on September 2009.
Aircraft Mechanic – Asian Spirit Airlines
Domestic Airport, Airport Road corner Andrews Avenue Pasay City, Philippines 1300
March 2001 – January 2006
Perform Line and Base maintenance on De Havilland Canada Dash 7, CN 235/-220 and LET 410 UVP airplanes.
TRAINING ATTENDED
Health Safety & Environment – 24 June 2014
Safety Management System/Electrical Wiring Installation System – 25 June 2014
Electro Static Discharge Sensitive Device/Airside Safety – 26 June 2014
Human Factors – 29 to 30 June 2014
Ground Headset & Communication – 06 July 2014
Fuel Awareness Limitation – 07 to 08 July 2014
Qatar Airways Technical Training
Qatar Airways Tower 2 PO Box 22550 Doha, Qatar
Fire Awareness – 09 July 2014
Working at Height and Confined Space – 10 July 2014
Qatar International Safety Centre
Street 45, Salwa Industrial Area
PO Box 23651 Doha, Qatar
Train the Trainer Course – 26 to 27 March 2014
Team Interpersonal Communication Skills Simulation – 13 May 2013
RB211 Trent900 General Familiarization Course – 19 to 20 August 2013
Lifting and Slinging – 28 February 2012
Fire Safety and Casualty Evacuation – 08 March 2012
Control of Substances Hazardous to Health – 09 March 2011
HS&E and Occupational Health for Employees – 29 August 2011
Manual Handling Techniques – 21 December 2011
Standard Practice Competencies – 20 June 2011 to17 August 2011
Rolls-Royce Singapore Pte Ltd Regional Training Centre
6 Seletar Aerospace Rise, Singapore 797575
Assembly Training of RB211 Trent900 Gas Turbine Engine – 20 Aug 2011 to 12 Feb 2012
Rolls-Royce plc Production and Test Facility
Gate 7 Wilmore Road Derby, Derbyshire United Kingdom
PW4000-94”, 100” & 112” Engine Differences Course – 28 to 29 October 2010
PW4000-112” Engine General Familiarization – 25 to 27 October 2010
Ergonomics (Health and Safety) – 14 November 2007
PW4000-94” Boeing System Familiarization/Standard Practices – 16 to 20 July 2007
Kaizen Event on PW4000 CAT 4 Engine Assembly Kitting Process – 09 to 13 April 2007
Behavior Based Safety – 06 June 2006
Achieving Competitive Excellence – 25 May 2006
Human Factor and Error Management – 10 April 2006
Eagle Services Asia Pte Ltd Singapore/ Pratt & Whitney and Singapore International Airlines Engineering Company Joint Venture
51 Calshot Road, Singapore 509927
Basic Aviation Skills (Basic Gas Turbine, Basic Measurement, Basic Safety Wire Locking)
21 August to 28 August 2006
Air Transport Training College Pte Ltd
Hangar 151 Western Avenue Seletar Airbase East Camp, Singapore 798366
Safety Seminar, Focused on Human Factor – 15 September 2005
Basic Aircraft Servicing Recurrent Training Course – 05 October 2004
CN 235/-220 Initial Maintenance Training – 14 August 2004
DHC 7 – 102 D Check Maintenance – 26 May 2003
DHC 7 – 102 Maintenance Initial Training – 26 May 2003
LET 410 UVP/E- Maintenance Initial Training – 01 March 2003
Maintenance Check and Daily Inspection of CN 235/-220 Aircraft – 27 November 2002
Basic Aircraft Servicing – 05 October 2002
Aircraft Ground Marshalling Training Course – 15 October 2002
Asian Spirit Airlines
Domestic Airport, Domestic Road corner Andrews Avenue
Pasay City, Philippines 1300
On- The- Job Trainee, C – 130 B/H – 03 March1995 to 07 November 1995
225th Airlift Squadron Philippine Air force, 220th Airlift Wing Philippine Air force
Brigadier General Benito N Ebuen Air Base Lapu-Lapu City, Cebu Philippines
On-The-Job Trainee, Cessna 150 Aircraft, O – 200 Engines
02 April 1994 to 05 October 1994
Cebu Aeronautical Technical School
Salinas Drive Lahug, Cebu City Philippines
EDUCATION
Bachelor of Science in Aircraft Technology: 1991 – 1994
Aircraft Maintenance Engineering: 1989 – 1991
Cebu Aeronautical Technical School
Laguardia Street Lahug, Cebu City Philippines 6000
Higher Certificate in Aerospace and Generic Manufacturing Skills
Singapore International Airlines Engineering Company Training Academy
28 February 2011 to 10 May 2011
Chai Chee Road Bedok, Singapore 469005
COMPUTER SKILLS
Basic operation on MS Word, Excel, Powerpoint
Basic Networking and Computer Hardware Assembly (DIY
