CV, Mechanical Engineer Seeking Work In Riyadh, KSA

Available

Serial No: 40492

Skills keywords: mechanical installation/alignment, construction supervision, • mechanical inspection, industrial mechanical, mechanical design, mechanical drafting

Current location: Riyadh Province, Saudi Arabia - View on map

Nationality: Filipino

Spoken languages: english, Slight Arabic, Tagalog

EMPLOYMENT OBJECTIVE:

To apply my extensive experience to carry out tasks with efficiency, professionalism and cost effectiveness. To actively contribute the development and growth of the Company as a Mechanical Design Engineer. Utilized strong organizational, communication and interpersonal relation skills, in a challenging, creative and stable environment.

Education

Bachelor of Science in Mechanical Engineering Graduate
Year 1977 – 1982

Professional Licences

Registered Mechanical Engineer
Licensed Number: 0083956
Conducted by: Philippine Regulation Commission
Address: P. Paredes St. Corner N. Reyes St. Sampaloc, Manila, Philippines
Website: www.prc.gov.ph

Certified Mechanical Engineer Professional
License Number: 94691

Certified by: Saudi Council of Engineers
Address: P.O.Box 85041 Riyadh 11691
Website: www.saudieng.sa

Work Experience

Position : MECHANICAL ENGINEER – Technical
Period Covered : April 1, 2010 – Present
Company : Saudi Bin Ladin Group – Public Building and Airport Division

Project : King Abdullah Financial District (KAFD)

Package C01B – Utility Tunnel

Package C01C – Subterranean Roads and Underneath Utility Tunnel

Address : Riyadh, Kingdom of Saudi Arabia

Software Used : Auto CAD 2007

Job Description :

– Technical Design review of HVAC, Fire Fighting and Drainage System

– Hydraulic Calculations for Submersible Pumps, Transfer Pumps, Fire Pumps and Booster Pumps.

– Pipe sizing of Drainage System and Fire Fighting System

– Mechanical and Plumbing Calculation

– Prepare MEP coordination drawing for site implementation

– Checked Shop Drawings, review and modified as per site situation

– Direct Supervision of five Draftsmen

– Coordination with Site Engineers, Design Engineers and Consultant

– Prepare MEP Builders Working drawings

– MEP Coordination between Parcel and Utility Tunnel connections.

– Monitor site installation status by comparing with the approved Shop Drawings

– Prepare As-Built drawings for approval and Drawings Status Log for Reference Purposes.

– Prepare equipment Schedules for all equipment used in the project such as, Supply and Extract Fans, Jet Fans, Air Outlet Louvers, Filters, various pumps and accessories, Drainage Manhole covers, Water Feature accessories, Ductworks and accessories, etc..

– Review Materials Requisition of Material Engineer if it is as per specification and approved Shop Drawings.

Position : SENIOR MECHANICAL DESIGN ENGINEER
Period Covered : August 1, 2006 – March 25, 2010
Company : Lopez Sugar Corporation – Planning & Control Department
Address : Paraiso, Sagay City Negros Occidental, Philippines

Software Used : Auto CAD 2004/2007

Job Description : Responsible for the preparation of plans, designs, estimates and supervision or implementation of major projects relative to construction or renovation of physical plant, machine or equipment either for improved operations, increased productivity and efficiency, or for the convenience and safety of Company personnel.

Detailed Duties :

– Prepares designs, estimates and working drawing of major mechanical or structural works using Auto CAD. Submits designs, plans, specification and estimates for review and approval.

– Prepares and conduct project bidding. Award and/or negotiate project with the winning bidder or directly to qualified contractor in accordance with the existing company policies.

– Directs or supervises the implementation of assigned projects. Insure that all works related to projects the safety of personnel, company facilities and operations must be given primary concern and should be within the budget, timetable, approved plans and specifications and in generally accepted sound engineering principles and practices.

– Initiate request for manpower and supervises the same as needed in the project.

– Check and review the plans and designs of projects assigned to the Junior Design Engineers as needed.

– Prepare contracts, work requests, purchase requisitions, gate passes, request for overtime works, and the like needed during the implementation of project.

– Evaluates and certify project accomplishment and request payment to accounting based on accomplishment. Recommends project incentives or penalty and expulsion/blacklisting of contractors as needed. Conducts performance evaluations of completed projects as needed.

– Certifies plan and design and other documents needed in the project required for government permits and licenses.

– Prepares drawings of various mechanical elements for spare parts fabrication, machining and/or casting.

– Maintains and updates technical records of the factory for ready references e.g. plans, maps, lay-out, charts, diagrams, equipment specifications, estimates, projects and
PWC documents, etc…

– Coordinates and give technical supports and/or advises to Company’s operating departments and subsidiaries as maybe requested.

– Executes Company rules and regulations and policies within the Department; exercises power, within established guidelines and policies, to suspend, hire, lay-off, rehire, assign or discipline subordinates or recommends effectively such actions.

– Performs other related duties as maybe assign.

Position : PROJECT ENGINEER – Special Project
Period Covered : March 1, 2003 – July 30, 2006
Company : Lopez Sugar Corporation – Quality Assurance Department
Address : Paraiso, Sagay City Negros Occidental, Philippines

Software Used : Auto CAD 2004

Job Description : Special Project: Installation of 60TPH John Thompson England Boiler.

Direct the implementation of the project. Responsible for the preparation of plans, designs, estimates and site supervision.

Detailed Duties :

– Directs or supervises the implementation of the projects. Insure that all works related to projects the safety of personnel, company facilities and operations must be given primary concern and should be within the timetable, budgets and approved plans and specifications and in generally accepted sound engineering principles and practices.

– Check and review working drawings mechanical works prepared by draftsmen and submit same for review and approval.

– Initiate request for manpower and supervises the same as needed in the project.

Position : SENIOR MECHANICAL DESIGN ENGINEER
Period Covered : August 4, 1999 – February 29, 2003
Company : Lopez Sugar Corporation – Planning & Control Department
Address : Paraiso, Sagay City Negros Occidental, Philippines

Software Used : Auto CAD 2000

Job Description ( Refer to the above Job Description )

Position : MECHANICAL DESIGN ENGINEER
Period Covered : May 16, 1995 – August 3, 1999
Company : Lopez Sugar Corporation – Planning & Control Department
Address : Paraiso, Sagay City Negros Occidental, Philippines

Software Used : Auto CAD Release 14

Job Description : Responsible for preparing designs, estimates and working drawings of projects relative to the improvement of factory operations, work place improvement and cost reduction studies.

Detailed Duties :

– Prepares designs, estimate and working drawing, using Auto CAD, related to minor mechanical, electrical or structural works, submit drawings designs and estimates for review, checking and approval.

– Prepares drawings of various mechanical elements for spare parts fabrication, machining and/or casting.

– Prepares invitation to bid; negotiates and awards minor projects to contractors in accordance w/ the existing policies.

– Prepares contracts, requisition slips, certificate of payment/accomplishments and the like.

– Directs and supervises the implementation of assigned projects. Insure that all works related to projects should conform with the approved plans and specification and in generally accepted sound engineering principles and practices.

– Performs other related duties as may be assigned.

Position : MECHANICAL DRAFTSMAN
Period Covered : December 1, 1991 – May 15, 1995
Company : Lopez Sugar Corporation – Planning & Control Department
Address : Paraiso, Sagay City Negros Occidental, Philippines

Software Used : Auto CAD Release 14

Job Description : – Responsible for preparing plans, estimates and working drawings of projects relative to improvement of factory operations, work place improvement or cost reduction studies.

– Does graphing of various charts, monitoring of project accomplishment and do blue printing jobs.

Position : JUNIOR ENGINEER
Period Covered : December 1, 1986 – November 30, 1991
Company : Togado Builders Inc. – Engineering Office
Address : Cebu City , Philippines

Detailed Duties :

– Responsible for preparing working drawings and estimates of projects relative to the improvement, expansion and cost reduction program of various industry.

– Design / Layout of Building Foundation and Construction.

– Prepared cost estimates and coordinates to Purchasing Officer for materials requirements during construction.

– Directs engineering personnel in fabrication of pre-fabricated materials required.

– Coordinates Factory / Industry Projects Engineers during site execution of projects.

Position : DRAFTSMAN/FIELD ENGINEER
Period Covered : December 1, 1982 – November 30, 1986
Company : Pacheo Construction & Engineering Works
Address : Sagay City Negros Occidental , Philippines

Detailed Duties :

– Responsible for preparing estimates and working drawings of projects as required by clients for the improvement/expansion/construction of various industry.

– Supervises Engineering personnel in fabrication of pre-fabricated materials required.

– Directs and coordinates operation, maintenance and repair personnel.

– Coordinates site Engineers for project implementation.

Educational Background

COLLEGE:

College B.S. Mechanical Engineering
West Negros College, Burgos St., Bacolod City, Philippines
Year Attended : 1979 – 1982
Graduated: November 1982
B.S. Mechanical Engineering

University of Negros Occidental – Recoletos, Lizares St., Bacolod City, Philippines
Year Attended : 1977 – 1979

Secondary Holy Trinity Academy,Paraiso, Sagay City Negros Occidental, Philippines
Year Attended: 1973 – 1977

Elementary Eusebio Lopez Memorial Elementary School, Central Lopez, Paraiso Sagay City Negros Occidental, Philippines
Year Attended: 1967 – 1973

VOCATIONAL:

Basic & Advance Computer Aided Design Course, MicroWorld System, CAD/CAE Technology Center, Bacolod City, Negros Occidental, Philippines
March 16, 1991 to October 19, 1991

Automated Computer Aided Design – 3D Speed CAD, Bacolod City, Negros Occidental, Philippines
May to June 1999 (35hrs)

Affiliations & Organizations

Philippine Society of Mechanical Engineers – Riyadh, Central Region Riyadh Chapter
Life Member
2010 – Present

Association of Filipino Plumbing Engineers – Riyadh, Central Region Riyadh Chapter
Member
2015 – Present

Central Lopez Multi-Purpose Cooperative, Paraiso, Sagay City Negros Occidental, Philippines
Member
1986 – Present

Knight of Columbus – Chapter 3707, Paraiso, Sagay City Negros Occidental, Philippines
Member
1995 – Present

Seminars & Reviews Attended

Course : Fire Protection System Design Seminar

Instructor : Philippine Society of Mechanical Engineers