Objective/Profile
Seeking a position as a Piping Designer where I can apply my skills and knowledge in the field towards the growth and development of the organization. I have around 9 year’s relevant experience of piping designing in Oil & Gas downstream services. Feed & Detail engineering of in Oil & Gas processing facilities, Wellheads, Refinery Plants & Pipelines.
Key Skills
• Plot Plans
• Key Plans
• Piping GA Drawings
• Piping Isometrics
• 3D Modeling
• Bill of Materials (BOM)
• Material take off (MTO)
• Bill of Quantities (BOQ)
• Pipe Support Drawings & Support Schedules
• Monitoring & Supervision of drafting team
• Pipeline Alignment Sheets
• Pipeline Standard Drawings
Computer Skills
• AutoCAD
• CAD Worx Plant
• MS-Office
• Micro station Education
• DAE Mechanical (2006)
• F.Sc (HSSC)
• Matriculation (SSC)
Training & Workshops
• Fire Fighting Training.
• Risk Management Training & Workshop.
• Team Building
• Work health and safety
Career Summary
SMEC Oil & Gas Private Limited Islamabad, Pakistan.
(2014-Present) as Piping Designer
(2012-2013) as Sr. Piping Draftsman
Attock Refinery Limited Rawalpindi, Pakistan.
(2009-2012) as Piping & Mechanical Draftsman
(2008-2009) as Trainee Executive Officer
(2006-2008) as Piping & Mechanical Draftsman with Sub-Contractor of ARL (Interglobe Commerce Pvt. Ltd)
Responsbilities
• Prepare/Checking of Plot plan, Key Plan and GA drawings.
• Responsible for Conceptual piping layouts for FEED.
• Handled the tasks of collecting information, performing calculations, preparing sketches and original rough layouts to present design proposal
• Prepare/Checking underground piping drawings i.e. Fire Water Circuit, Close Drains etc.
• Prepare/Checking of Isometric drawings with Bill of materials (BOM).
• Development of Sketches at site & collect necessary information of tie inn points.
• Prepare Material take off (MTO) and Bill of Quantities (BOQ) for Piping & Pipeline.
• Preparation of Pipeline Alignment sheets, Riser Details and pipeline standard drawings.
• Reviewing the engineering / design changes & resolving quality related problems associated with Layout & design.
• Coordinating with other Engineering disciplines such as Mechanical, Civil, Electrical, Instrumentation etc. for successful completion of projects.
• Modify drawings as per comments and submit to consultant for approval.
• Piping mark-ups on P&ID’s
• Conduct and attend 3D model review with client at various stages of the project.
• Review of 3D model from following point of view
Clash detection, safety and integrity requirements, operation & maintenance
Requirements, good engineering practices and clients comments / requirements.
• Piping modifications & design jobs in the refinery.
• Handled Turnaround activities (TA 2007, 2009, 2011) in refinery.
• Reviewed of piping work in progress on continuing basis.
• Cost estimates, material take off lists & scope of works, contractor’s work cost estimation
• Interface and provide clarifications, guidance and technical support to construction and Commissioning teams as required
• As-Built drawings for API-650 storage tanks.
• Preparation of fabrication drawings of structures e.g. piping supports, filling gantries, stairs, Platforms & modification to existing structures etc.
Projects with SMEC Oil & Gas:
FEED for Gambat South GPF-II Project Train-II
Client: Pakistan Petroleum Limited (PPL)
Engineering Design Review Services for Gambat South GPF-II Project Train-I
Client: Pakistan Petroleum Limited (PPL)
– Free Water Knock Out (FWKO) Processing Train Project (Proposal Support)
– EPC and Commissioning Support Services for Produced Water Pipelines – North Rumaila (Proposal Support)
– Produced Water Treatment – North Rumaila (Proposal Support)
Client: CPECC
Engineering Consultancy Services for Hydrocarbon Dew Point Control Plant at Mari Deep Central Processing Facility
Client: Mari Petroleum (MPCL)
Detailed Engineering of Latif -10 Wellhead Facility.
Client: OMV (Pakistan)
Tender Design Services (Sulfur Railcar Loading Facilities) – Saudi Aramco D & C
Client: SINOHYDRO
Detailed Engineering of Mehar Condensate Transportation Project
Client: OMV (Pakistan)
Detailed Engineering of 4 Wells Early Production Facilities
Client: China Petroleum Engineering & Construction Corporation
Detailed Engineering of Latif 6&7, 5&9 Wellheads Development Project
Client: OMV (Pakistan)
Detailed Design for Sawan-12 Flow line.
Client: OMV (Pakistan)
Design and Engineering Services for MARAMZAI-02 and MAMIKHEL-02 WHSF and Respective VA Project.
Client: MOL
Basic & Detailed Engineering Study for Augmentation of Makori Early Production Facility Project
Client: Schlumberger.
Zamzama Gas Plant Modifications.
Client: BHP Petroleum Pakistan Pvt. Ltd.
Infill Wells Surface Facilities Development Project
Client: BHP Petroleum Pakistan Pvt. Ltd.
Basic and Detailed Engineering for Latif Gas Processing at Sawan
Client: OMV (Pakistan).
Major Projects with Attock Refinery Limited:
– Complete design package of New Pump House at Product Metering Station.
– Design of piping design package of Air Compressor.
– Addition of Boiler Feed Water Pump at Boiler House with existing tie inn
– Piping modification for diversion of LPG from Reformer Stabilizer section to LPG storage vessels.
– Piping modification for installation of New Pumps at crude decanting facility.
– Piping modification for taking two Storage Tanks in kerosene service
– Complete Design Package of Weigh Bridge.
– As Built drawings of oil storage tanks, Heat Exchangers etc.
