Career History
Feb 2014 Present. Commissioning Operation Engineer. ORASCOM CONSTRUCTION INDUSTREIS CO.(OCI). Biaji, Iraq
Reason for leaving/changing Project stopped due to the unstable conditions in Iraq.
Commissioning Operation Engineer, in BAIJI Power Plant (6×160MW) SIEMENS SGT 2000E, GAS TURBINE under SPPA-T3000 Control System. Fuel Unloading, Fuel forwarding, Crude oil treatment, water and Waste water treatment plants.
Responsibilities and Skills:-
• Directing and guiding the operation team, coordinate the commissioning activities (Mechanical, electrical and I&C) for GTG (gas turbine Generator) area, and BOP (balance of plant) area.
• Participate in kick off meetings performed by relevant project and Participate in project status meetings.
• Prepare the PTW system to confirm that all the activities are doing as per the company quality with close coordination with the SIEMENS team on the site.
• Ensure the preparation of commissioning, operation, and quality record and feedback documentation.
• Work Shoulder-to-shoulder with the planning department to follow up and update the project schedules.
• Maintain logbooks to record commissioning and operational events as specified in the work instructions.
• Assist with preparing commissioning schedule, developing primary turnover system creation, preparing commissioning resource plan and preparing commissioning execution plan.
• Maintains and Prepare all CCC packages, operations and maintenance documentations.
• Following and helping in the commissioning procedure for the GTG systems and prepare the daily progress reports with SIEMENS TFA’s (technical field advisors).
• Responsible for assisting the start-up commissioning teams with all aspects of power plant operations.
• Worked as a Shift Supervisor during commissioning to train the local Iraqi Operators how to operate all plant systems.
• Carry out risk assessments on each job as required and raise any concerns with the commissioning Manger.
• Monitoring the performance of staff and operational support contract staff to ensure optimum delivery from the plant.
• Developing all plant operating procedures for GTG area, fuel unloading, treatment and forwarding plant.
• Provide a professional operations support service to the project department and directly to customer.
1st May 2013 30th Sep 2013 Operation support Engineer.
Shift Charge Engineer. ARABIAN BEMCO CO.LTD
(MTE Sub-contractor). Al Qurrayat,
Saudi Arabia.
Reason for leaving/changing The project already completed and handed over to the customer (Saudi Electricity company SEC).
Lead and support Operations engineer 2 turbines *70MW (7001EA), Speed Tronic MKVIe, with the fuel forwarding and fuel treatment plant. Construction of Al Qurrayat power plant.
Responsibilities and Skills:-
• Directing and guiding the operation team, coordinate the Job with the other departments (construction and commissioning) for GT (gas turbine) area, and BOP (balance of plant) area
• Monitoring the performance of staff and operational support contract staff to ensure optimum delivery from the plant.
• Preparing, planning and following the preventive maintenance for the mechanical and chemical Job which related to the GTG area and the BOP area during the operation periods.
• Analyze and propose resolution on operational issues and concerns defects and alarms reports (e.g. Workshop Repair Request, Field Improvement Proposal, and Construction Work Request & Problematic Well Advice) in collaboration with support departments (e.g. Maintenance Department) to ensure maximum uptime of the field/terminal.
• Maintains all shift operations and maintenance documents.
• Providing leadership and technical direction to skilled laborers performing work on customer site to ensure work activity meets the requirements of the customer.
• Assist the Plant Manager in implementing company policies, SOPs, safety procedures, good housekeeping, energy conservation guidelines and environmental regulations.
• Ensure that plant is designed to maintain continuous operations as per contract/ customer dispatch request
• Maintaining strong safety mindset to assure the executed work reflects the technical requirements.
• Coordinate with Maintenance Supervisor on maintenance servicing, overhauls and test/commission activities.
1st June 2012 15th March2013 Lead Operation Engineer.
Shift Charge Engineer. ARABIAN BEMCO CO.LTD
(MTE Sub-contractor). Dammam,
Saudi Arabia.
Reason for leaving/changing The project already completed and handed over to the customer (Saudi Electricity company SEC).
Lead GT area operation engineer. 3 Gas turbines *150MW (7001FA), Speed Tronic MKVI-e.
Qurayyah block #6 projects, Saudi Electricity Company.
Responsibilities and Skills:-
• Directing and guiding the operation team, coordinate the Job with the other departments (construction and commissioning) for GT (gas turbine) area, and BOP (balance of plant) area
• Preparing the reliability reports for the running GTGs.
• Preparing, planning and following the preventive maintenance for the mechanical and chemical Job which related to the GTG area during the operation periods.
• Analyze and propose resolution on operational issues and concerns (e.g. Workshop Repair Request, Field Improvement Proposal, and Construction Work Request & Problematic Well Advice) in collaboration with onshore support departments (e.g. Maintenance Department) to ensure maximum uptime of the field/terminal.
• Ensure that plant is designed to maintain continuous operations as per contract/ customer dispatch request
• Arrange and drive and lead the shutdown post mortem on lesson learnt for future improvement.
• Managing and co-coordinating the outage punch list items completing.
• Maintains all shift operations and maintenance documents.
• Providing input for Daily Outage and Weekly Installation Reports in a clear, detailed and accurate manner.
• Providing leadership and technical direction to skilled laborers performing work on customer site to ensure work activity meets the requirements of the customer.
February 2012 May 2012 Lead Operation Engineer.
Lead CCR Operator. HYUNDAI HEAVY INDUSTRIES CO.LTD (MTE Sub-contractor). Riyadh,Saudi Arabia.
Reason for leaving/changing My work agency chooses to transfer me for another project to satisfy another customer.
Lead operation engineer (Main control room operator). 7 turbines *170MW (7001FA), Speed Tronic MKVIe with 2 GE steam
Turbine and there auxiliaries, water treatment plant, fuel treatment and natural gas station.
Construction of PP11 IPP, power plant for Dhuruma Electricity Company.
Responsibilities and Skills:-
• Leading, directing and guiding the operation team, coordinate the Job with the other departments (construction and commissioning) for GT (gas turbine) area, and BOP (balance of plant) area.
• Reports and corrects unsafe conditions or hazards to the Operations Manager.
• Assist Start-up Engineer during the commissioning phase ensuring proper and safe operation of the machine.
• Performs water titration tests and adjusts chemical injection rates to maintain prescribed chemical limits in heat recovery steam generator.
• Ensure that plant is designed to maintain continuous operations as per contract/ customer dispatch request
• Following proceeding for system start up and shut down for the gas turbine GE 7001FA DLN duel fuel machine.
• Start-up and operation for Fuel Gas Treatment:
• System consists of three (3) 50% “Knock-out Drums” and three (3) 50% “Filter and Separators”,.
• One (1) 100% ultrasonic flow settlement meter and One (1) 100% ultrasonic flow Back-up meter ,and two gas chromatographs.
• Three (3) x 50% gas fired water bath heaters.
• Pressure reducing stations consisting of four (4) x 33.3% pressure reducing valve trains.
• Four (4) x 33% Gas compressors are provided to increase the line pressure to meet the pressure requirements of the gas turbines.
• Oil bath heater: Each unit has one oil bath heater that is MWI (Modified Wobbe Index) control heaters.
• Monitoring and operation for water treatment plant (filtered, service, demi, and waste water treatment).
• Monitoring and operation for liquid fuel treatment (sodium removal plant: GEA Westfalia Separators).
April 2010 July 2011 Operation Engineer. ARABIAN BEMCO CO.LTD
(MTE Sub-contractor). Riyadh, Saudi Arabia.
Reason for leaving/changing The project already completed and handed over to the customer (Saudi Electricity company SEC).
Gas turbine operation engineer. 32turbine*55MW (7001EA) Speed Tronic MKVIe. Construction of Power Plant No. 10. For Saudi Electricity Company.
Responsibilities and Skills:-
• Following proceeding for system start up and shut down for the gas turbine GE 7001EA duel fuel system (diesel and crude fuels).
• Following Liquid Fuel system Flushing and air venting Procedure.
• Water Wash System Procedure online (the compressor) and off line (the compressor and the turbine).
• Lock-out & Tag-out for chemical, mechanical and electrical equipment.
• Operation for crude fuel treatment plant (GEA WestfaliaSeparator).
• Opens and closes valves as required for proper system operation and mechanical isolation.
• Performs routine predictive, preventive, and basic corrective maintenance in accordance with technical manual procedures.
• Visually inspects and listens to equipment at periodic intervals to detect malfunctions or need for repair, adjustment or lubrication.
• Monitors readings from instrumentation for variances from prescribed operating standards and procedures.
• Supports maintenance activities on a part-time basis as required (e.g. tightening fittings, replacing valve packing, gaskets, valves, gauges, and cleaning or replacing other component parts as required).
January 2009 March 2010 Operation Engineer.
CCR Operator. UEEPC.
Upper Egypt Electricity Production Company. Cairo, Egypt.
Reason for leaving/changing Need for better career opportunities to grow in my careers, improving my skills and experiences also looking for higher paying job.
Gas turbine operation engineer GE. 2*260 MW (MS 9001 FA), Speed Tronic MKVI. ALSTOM HP STEAM TURBINE 250 MW (ALSPA P320). Construction of EL KUREIMAT III 750MW Combined Cycle Project.
Responsibilities and Skills:-
• Following proceeding for system start up and shut down for the combined cycle.
• Following proceeding for turbine cold and hot start up.
• Monitor operation condition for the unit during normal operation.
• Monitor the gas turbine condition during normal operation through MARK VI and MARK VIe control system.
• Lock-out & Tag-out for chemical, mechanical and electrical equipment.
• Following proceeding for starting, shut down, unit increasing and decreasing load.
• Start up and operation CEMS Continuous Emissions Monitoring System.
• Visually inspects and listens to equipment at periodic intervals to detect malfunctions or need for repair, adjustment or lubrication.
• Monitors readings from instrumentation for variances from prescribed operating standards and procedures.
• Records operation and maintenance actions taken during shift in operator’s logbook.
Education
B.SC. in chemical Engineering.
EL MINYA UNIVERSITY, EGYPT.
2003 – 2008.
Grade: 67.00 %.
Languages
Arabic Native or bilingual proficiency
English Full professional proficiency
French Elementary proficiency
Training
Date. Training. Place.
2005 Chemical engineering laboratory training. Elminya university, Egypt.
2006 Waste water treatment plant operations. Nile CO. for pharmacy and chemical industry, Egypt.
2007 Operations department (prevent corrosion unit). Gulf of Suez Petroleum CO. Egypt.
2009 O&M of Condenser Vacuum pump training – NASH, A Gardener Denver Product Upper Egypt Electricity Production CO., Egypt.
Certificates
Date Certificate Issued by Country
2014 OSHA Academy – USA 30-Hour General Industry. EHS ACADEMY EGYPT
(NASP USA partner).
EGYPT.
2014 OSHA Academy – USA 30-Hour Construction Industry. EHS ACADEMY EGYPT
(NASP USA partner).
EGYPT.
2012 PTW/LOTO PERMITS RECEIVER CERTIFICATE. HYUNDAI HEAVY INDUSTRIES CO.LTD SAUDI ARABIA.
2010 PTW/LOTO PERMITS RECEIVER CERTIFICATE. ARABIAN BEMCO CO. SAUDI ARABIA.
