Education and Professional Industrial Certifications / Training:
Degree in Mechanical discipline: Mechanical Technician Petrochemical Industry of pumps, compressors, engines.
– Industrial Courses: Petrochemical Industry Operator Process Control (Crude-oil Distillation)
IT Data Operator
Qualification: Mechanical Commissioning Supervisor with 27 years of experience
Professional Profile:
– Good technical background with experienced in co-ordination, control, supervising in pre-commissioning, commissioning activities for mechanical stationary and rotating equipment, solid practical knowledge in lube oil flushing in power generation plant/oil/ gas plant.
– Able to work on own initiative in a multi-disciplined team, ability to work under pressure the activities with tight schedules necessitating extra hours, capability in supervising units operation under critical and emergency situations.
Employment history:
1. Qatari Diar – Qatar 2010 August – July 2013 (2 years 11 months)
Contractor: ‘’EMS” Electromechanical O & M
Position: Site Mechanical Engineer / Operations & Maintenance
Job Responsibility:
Duties included mechanical operations & maintenance activities for 14 buildings and facility such as:
-Water and fluid systems: Chilled Water Pumps, CWS and mains Cold Water System, Pumps, Fire
Fighting & Sprinklers System, Diesel Fire Pumps, Fire Water Tanks.
-HVAC /Structures and Supports: BMS room, Chillers units, AHU’s, FCU’s, Ducts, Package units.
-Pipe work Equipment/Sanitary and Drainage: Pipe work, Fittings, Valve schedules, Water tanks.
Supervising and participate in the preventive, corrective and troubleshooting maintenance (day/night covering 24 hours shift schedule maintenance),identifies source of problems, diagnosing, repairing faults, discuss and initiates action quickly and efficiently, continuous maintains radio contact and mobile phone for any emergency with shift area operators in Main BMS room.
My duties including also day to day work planning activities, close monitoring and preparation of daily works progress report, completes the work orders in Computerized Maintenance Management System with materials, manpower, ensures that spare parts and the required materials are ordered available and in good condition before starting maintenance activity in accordance with planned operations and maintenance schedules, arranges the transportation of materials to site and resolve problems with personnel mechanical technicians in respect of Safety.
2. Qatar Petroleum – Qatar (Ras Laffan Port) 2009 June – August 2010 (1 year 2 months)
Nakilat Construction Facility Mechanical & Electrical Ship Yard Phase 4
Contractor: Archirodon Construction (Greece)
Position: Site Mechanical Commissioning Engineer
Job Responsibility:
Responsible for the site mechanical construction activities for Facility Mechanical (12 hours rotating day/night shift schedule),supervising prepares and assists in preparation with commissioning responsibility, pressure test, leak testing, hydro test, flushing, blowing up, punch list, commissioning check lists, arranges equipment testing, coordinate between different pipeline activities of workers engaged in installing, assembling or fitting work (BS,SS, GI, Copper and PVC), pipe-racks erection, pipe-trench and sleeper racks, piping system fixtures, hangers and supports installation ensuring work is carried out in accordance with relevant Codes, Standards and Procedures in respect of Safety, marking and checking weld maps on isometrics, insulation requirement, make progress reports.
Supervising the installation and testing mechanical stationary and rotating equipment in the plant, (booster pumps, compressors), verify rotating machine, monitoring daily the installation site constructions multidisciplinary mechanical activities such as: Pump house piping, Potable Cold & Hot Water System, Storm Water System, Sanitary System; Fire Suppression System, Upright sprinkler, Pendent sprinkler, connection Alarm Gong, Retard Chamber, Alarm Check Valve, Pressure Reducing Valve (PRV),Non Return Valve (NRV), Relief Valve, Flow Switch, 2/4 Way Breeching Inlet (Naffco), Tamper Switch (Potter),Supervisory Switch (Potter),Assembly Valve, Landing Valve.
Training course of Understanding & Activities for safety rules in Plant Operation.
3. Ministry of Electricity & Water – Kuwait 2007 September – December 2008 (1 year 3 months)
Power Plant Expansion Project – Doha West
Contractor: Creative Power Solutions (CPS) Switzerland and Workshop executed by Contractor (IMCO)
Position: Mechanical Commissioning Engineer / Shift Charge Engineer
Job Responsibility:
Responsible for the safe and efficient tests commissioning of 5 Gas Turbine (GE) LM 6000 and auxiliary system such as: Oil Systems with Lube Oil, Power Oil and Jacking Oil, Closed Cooling Water System for the Lube Oil and Generator Cooling; Cooling Air Systems on the Gas Turbine, Filters house and Air Intake, Exhaust System; Water and N2 Purge Systems, Sound Enclosure and Ventilation Systems; Fire Fighting Systems and Gas Detection; including also responsible for the Fuel Gas and Fuel Oil Systems such as: Gas Metering, Scrubber and Filters, Gas Heater and Pressure Reducing Stations and Gas Compressors; Fuel Oil Metering and Forwarding Station, Loading/Unloading Storage Tank System.
Employed as a Commissioning Mech. Engineer I have performed pre-commissioning and commissioning activities: Walk down Inspection, Punch List, Work Request Sheet, Data Sheet Preparing; Commissioning Check List Site, Pre-start-up, conformity Checks and Static tests execution.
Coordinating mechanical commissioning team to carry out all jobs, according to GE Commissioning recommended procedures: Blowing up-air line, Pressure test, Filling up & hydro test-auxiliary, Leak test, Water cooling line, Flushing Synthetic/Mineral lube oil line-hydraulic oil line, field supervision and verification of installed equipment, hydraulic pump, fans, air compressors, air blowers, gas compressors, monitoring and inspection of alignment pipelines by the drawings, install support on the line, prepare pipeline for fit up; prefabrication in Workshop executed by Contractor (IMCO)and other power plant related works.
Implementing Start-up, Normal, Shut Down operations and emergency handling at plant field as per operation manuals; start, stop and switch rotary machinery as per operating schedule or checking-up results in the plant units, training course of Understanding & Activities for safety rules in Plant Operation, implementing knowledge of all mechanical team about Fire Fighting and Disaster Prevention.
Hand over to the operation team the units in full confidence and with required safety.
4. Refinery “Rafo” S.A. – Romania 1994 November – August 2007 ( 12 years 9 months )
Catalytic Reformers Unit
Position: Mechanical Commissioning Supervisor / Shift Charge Supervisor
Job Responsibility:
Supervising during shift the operations of the plant units, in charge with control of the process parameters, monitoring pressures, temperatures, vibrations, checks of oil level and other related general running conditions from Main Control Room, taking efficiency measures to adjust them for optimum process operations.
Responsible for the safe and efficient operation, maintenance and reliability of the centrifugal gas compressor GHH (turbine with steam/compressor H2S), type GVT4/6 (German product) and auxiliary equipment such as: oil and gas sealing, cooling system, lubrication system, hydraulic system, (Koop, Kuhnle and Kasch turbo-pumps). Guided by measuring and control equipment consisting of: pressure transducers, rotary transducers, temperature detectors, temperature control regulator switch, gas flow controller, gas pressure regulator I ensure that the facilities are operated and maintained in accordance with Company Standards. Recording daily local data turbine parameters in log book.
Participate in the planning, scheduling and execution of shutdown and major overhaul maintenance activities, joined whit mechanical commissioning team this includes changing oil, cleaning strainers, replacing filters, chemical cleaning, leak test, flushing, blowing, participate to system filling, repairs and or replaces defective parts, nitrogen purging, reassembles overhauls equipment.
All the works were performed taking into account the risk assessment and following the safety rules.
5. Refinery “Rafo” S.A. – Romania 1986 April – October 1994 ( 8 years 6 months )
Gasoline Hydrofining Unit / Crude-oil Distillation Unit & Vacuum Distillation Unit
Position: Mechanical Commissioning Supervisor
Job Responsibility:
Supervising pre-commissioning and commissioning field activities with interfacing between construction and operation of the reciprocating compressors (H2S) Hood unit (built under Brother Ltd. License), in charge with control of the process parameters (temperatures, pressures, levels, flows) from Control room, taking efficiency measures to adjust them for optimum process operations; executes all operational activities in different process and utilities equipments in field during normal operation, plant start-up, shutdown and emergency situations.
Efficient operations, planning, coordinating and supervising mechanical commissioning team for complex installation and assembling activities for stationary and rotating equipment systems, pumps station, filters, valves, fans, blowers, columns, vessels, heat exchangers, oil console, interconnection piping, air system, coolers, oil flushing, removing or replaces defective parts and inspecting the journal bearings and the axial bearing, mechanical seals both sides, the lube oil system, gas sealing system and nitrogen barrier system.
Regular monitoring, disassembly of various static and rotating equipment, the analysis of the failure, the decision on how the repair, repair and reassembly of equipment as well as implementation of modifications, participates in the testing and startup of overhauled equipment.
Organizing and managing the operations in field of the assigned team by controlling their job and the implementation of Plant Safety procedures in case of emergency.
