1. Bachelor of Science in Industrial Technology BSIT Electrical Graduated.
Mindanao State University IIT , Iligan City , Lanao Del Norte , Phil.
2. Professional Registered Safety Officer License No. 2415 by the International Board of Environmental health and Safety IBOEHS , Tucson , USA.
3. OSHA 30- For Construction Safety and Health
4. OSHA 10- For General Industry Safety and Health
5. NEBOSH ICG
1. MPH CIFAL-RUS/ GE Power - KTEC-3 9HA GT Modernization Project
Kazan City , Republic of Tatarstan , Russian Federation
Oct. 15,2016 to May 31. 2017.
2. SBM Offshore Inc.- Conversion Project of two Floating Production
Storage Offloading Vessels the foll. are FPSO Cidade De Marica , FPSO
Cidade De Saquarema , Chengxi Shipyard , Guangzhou City , China
August 6, 2014 to August 31 , 2015.
3. Wood Group GTS PS Ltd / Shanahan Engineering Ltd - DORAD Energy
2x800MW Combine Cycle Power Project , South Industrial Zone ,
Ashkelon , Israel- Jan. 2013 to March 2014.
Work History
COMPANY PROJECT/PLACE DATE ( From-To ) POSITION/ REASON FOR LEAVING
SBM OFFSHORE INC. FPSO CIDADE DE SAQAUREMA , Chengxi Shipyard , Guangzhou City , China August 06 , 2014 up to August 31 2015 Permit to Work Coordinator / LOTO Coordinator FPSO Vessel set to sail away to Brazil Braza Shipyard for final integration.
WOOD GROUP GTS PS LTD/ SHANAHAN ENGINEERING LTD. 2X800MW Combine Cycle Power Project , South Industrial Zone , Ashkelon, Israel January 11,2013 to March 31, 2014 Permit to Work Coordinator / LOTO Coordinator Project Completed and was handover to client operation
PETROFAC SOUTH EAST ASIA LTD / PETROFAC ENERGY DEV. SDN BHD FPSO Berantai Dev. Project, Singapore Onshore, Malaysia Offshore Nov. 06 2011 to
Dec. 17 , 2012 Permit to Work Coordinator / LOTO Onshore/Offshore Commissioning Completed handover to client operation
SPENCER OGDEN OIL & GAS LTD GE/GAMA POWER SYSTEM 2x400MW Combine Cycle 9FB Power Project , Surgut City Russian Federation January 2011 to July 2011 Permit to Work Coordinator Commissioning / Operation Project completed and was handover to client operation
SPIE OIL and GAS MIDDLE EAST LLC/SNC LAVALIN Emirates Aluminium Smelter Refinery Project , Al Tawellah Abu Dhabi , UAE Dec. 24, 2009 to October 31 , 2010 Permit to Work Engineer Project Completed and was under Client operation
TECHNIMONT / DAEWOO ENGINEERING CONSURTIUM Ethylene Derivatives Complex 11 , Qatar Chemical Company Messaieed , Qatar Sept. 1, 2008 to December 15, 2009 Commissioning Electl Supervisor / Permit to Work Coordinator Project handover to operation by the client.
CONSOLIDATED CONTRACTORS COMPANY WLL Khursaniyah Gas Plant , ARAMCO KSA August 11 , 2007 To August 11,2008 Site Electrical Installation Supervisor Voluntary did not sign the renewal of the contract.
ABV ROCK GROUP KB LTD KSA Strategic Storage Program for Jet Fuel , Diesel and Gas March 2001 to March 2007 Electrical Commissioning Supervisor Project Completed and was handover to ARAMCO ABV ROCK GROUP KB LTD Drilling of Cavern , Pipeline Tunnels for Oil and Gas. October 1991 to January 1999 Electrical Maintenance Foreman Tunnels excavation Job completed.
Qualifications
Having acquired a rigid relevant working experienced in the field of Permit to Work System , Electrical Installation , Pre-Operation and Verification , Commissioning and Warranty in marine environment , oil and gas , energy like FPSO ( Floating Production Storage and Operation ) in onshore and offshore fields , oil and gas refineries , ethylene derivative complex , aluminium smelter , power plant projects to include pipelines and underground facilities for Jet fuel , Diesel and Gas.
Seeking a challenging position in a progressive organization. To be a part of an excellent leader organization that promotes professionalism success and employee advancement, willing to accept any challenge to sustain professional competency. A certified holder of OSHA General Industry / Construction Health and Safety and a Registered Safety Officer of ( IBOEHS ) International Board of Environmental Health and Safety ) Arizona , Tucson , USA. Licensed No. 2415. Holder of BOSIET card from MSTS FALCK NUTEC , MALAYSIA , NEBOSH IGC.
Accomplishing different well known oil and gas , energy companies like SBM OFFSHORE , WOOD GROUP GTS PS LTD , PETROFAC , SPENCER OGDEN OIL AND GAS LTD , SPIE OIL AND GAS MIDDLE EAST LLC , DAEWOO ENGINEERING & CONSTRUCTION LTD , CONSOLIDATED CONTRACTOR COMPANY WLL , ABV ROCK GROUP KB ( which specialized in constructing , commissioning and warranty of Underground Storage Facilities for Jet fuel, Diesel and Gas and Pipelines for defense ministry and ARAMCO).
Professional Synopsis
PERMIT TO WORK COORDINATOR KEY RESPONSIBILITES :
Permit to Work Coordinator for Construction, Commissioning and Operation, responsible for the Coordination of the Bridging work permit. Handling lectures training to all employees in the project site. Directly responsible to provide centralized control over the LOTO while providing an equivalent high level of safety to all employees that are working in energized system.
The person designated by the OIM , Commissioning Manager , Conversion Manager to be responsible for coordinating and administering the Permit to Work System . He must ensure the implementation and administration of the Lock out / Tag out (LOTO ) under the PTW procedure.
Encoding all work permits in the PTW Tracking Data Base. Make sure isolations certificates ( ICC )are cross referenced to all active work permits that requires LOTO to prevent conflicting activities with the construction, commissioning and operation.
To see to it that daily and weekly audits is done in the PTW system. To operate as the Central Coordinator of all work permit including the provision of formal authorization that all permits & preparations required have been examined for mutual compatibility. To assume responsibility to answer OIM and has the OIM authority to suspend or refuse to issue work permit , I consider unsafe or incomplete.
Issuance of daily work permits , see to it that proper attachment are in place like SLD , P&ID , JSA , Risk Assessment and the work applied for are having DMCC (Discipline Mechanical Certificate) to show the System is totally completed and is ready for energization. Boundary limits of acceptance are properly Highlighted, isolations points are properly marked and Notice of Energization are already circulated.
To make daily site inspection to make sure all work permits description, isolations are properly followed according to the PTW procedures and project requirements. On site cancellation of work permits that are violated by the workers to make sure safety of workers are strictly adhered.
Effectively set up and run / register for lock out / tag out ( LOTO ). Final review sign on / sign off and issue PTW work permits . Implementing LOTO procedure through start up, set up implement and operate Commissioning Permit to Work System. Full understanding of the work to be done and give authorization of the protection required to make the system safe / equipment’s safe to work.
To coordinate between Construction, Commissioning and Operation regarding work permits application to prevent unnecessary delay , to make sure every discipline are safe while implementing the required jobs to be done. Ensuring that all active work permits are highlighted in Daily Permit Coordination Meeting to prevent clashes of activities between construction , commissioning and operation.
To implement proper PTW training modules that will suit to project requirements. To make sure System Responsible Engineers, Area Authorities, Performing Authorities, Isolating Authorities are properly train In the system to include competent technicians and subcontractors employees in the project site.
COMMISSIONING ELECTRICAL SUPERVISOR KEY RESPONSIBILITES :
Review contractor compiled / submitted mechanical completion packs, ensure correct compilation and data documents for job package handover. Ensure all documents relevant to compilation & data requirements of the handover certification packs are at correct status at date of submittal attendance to associated completions / commissioning status and handover meetings. To correct status reports, achieve timely handover as per defined by pre-commissioning / commissioning schedule.
To ensure the complete compliance of the activities with the safety procedures and practices. Supervising all checking and testing necessary to complete the works , loop checking and handover including all necessary documentation. Hands on in pre-operation & verification, commissioning of LV/MV switchgears, test ct , VTs , internal wirings for panels , local operation and functional test for LV/MV control and protection settings.
Evaluating the joint resistance value and proper formation of bus duct lines from switchgears to transformer terminal point to ensure smooth operations Implementation of the Permit to Work procedures for commissioning works. Ensure no one will work without permits in areas under my supervision. To conduct Tool Box talk meeting prior to start the work to make sure all competent technicians under my supervision are properly informed regarding the hazards in energized system.
Performed regular checks / test systems cables prior to energization , reported accordingly to Commissioning Manager of technical deficiencies / trouble with production /evaluation and recommend appropriate solutions to establish a uniform procedures for performing cable test operations.
Spearheaded the overall activities of commissioning in areas under my responsibility including commissioning works in MV/LV Switchgears, Compact Substations, local motors controls, commissioning and weekly monitoring of Cathodic protection in Diesel , Gas and Jet Fuel pipelines from underground facilities to Aramco Refinery to include solar system in Boaster stations.
Piloted the 360 hours endurance test for Power Generation responsible for the full in load Bank Type- P12302 for Generators in Power Generation Area.
Verified the electrical equipments in alignment with the specified designs, drawings, data sheets as well as respective Equipment Tag numbers. Compared overload relay protection with the motor full load current for proper sizing and eliminated variances. Responsible for measuring bus bar resistance, bus bar joint contact resistance of LV Switchgears using DLRO testers.
Accountable for loop checking of control and power cables from Substations to field equipment , point to point from equipments to JBD , CPC Panels. Supervised functional test of local control stations, oversaw functioning of instruments and control prior to energization.
Accompany walk downs with the construction teams , checking all punch list items are rectified prior to accepting the ( DMCC ) Discipline Mechanical Completions Certificate that shows system are totally complete and are ready for energization. Working with the circulation of the Livening Notice to all concerns prior to apply for work permit for equipment’s energizations.
KEY RESPONSIBILITES OF ELECTRICAL INSTALLATION SUPERVISOR :
Supervised authorized Raychem certified electricians in performing terminations of cables in indoor / outdoor cables for transformers, MV / LV switchgears, Compact Substations to include joint terminations of MV cables.
Supervised cable pulling operations monitoring works in field to ensure cables used in areas are pulled according to job packages specified specially in hazardous zones. Giving proper advises in charging cables to every job packages in order to minimized scrapping of cables that will results to losses of production.
Supervised installation of cable trays in underground areas, installations of supports and check accordingly of earthing bonding are installed in every joint, cable routing and check if all works are done according to specified drawings , installation details and engineering standards to include installations of conduiting.
Supervised in installations of LV / MV switchgears in Substations. See to it that equipments are installed in accordance with the detailed drawings. Give proper advice to installer electricians to follow strictly the manufacturer’s installation standards relevant in alignment of bus bar and torque bus bar according to manufacturer’s data.
To raise clarification request to drawings, details of installations that cannot be applied due to clashes between civil or mechanical works. To submit proposed drawings applicable for the solution of the conflict for the project engineering team to raise site query to clients for approval.
To conduct Tool Box Talks to all electricians, technicians working under my supervision to give them awareness to follow strictly engineering standards, drawings, installation details, rectify QC comments to prevent difficulties in closing job packages in completed work areas and to work in accordance with the safety culture to prevent injuries while doing the necessary works to be done.
Superintended the installation works for various job packages and oversaw the installation operations strictly adhere to drawings, specified installation details and engineering standards procedures.
Interacted effectively with installer’s electricians & instrument technicians to ensure sound availability of technical documents, drawings, installation details and timely delivery of materials on site for incessant services. Analyzed project deficiencies affecting production, quality and safety requirements prior to final evaluation to implement corrective measures thus ensuring smooth functioning timely completion of the work in areas under my supervision within the specified budget.
Determined work procedures for mechanics, prepare work schedules / logs and expedited work flow as per priorities. Offered training guidance to electricians and instrument technicians to ensure completion within established time / cost deadlines.
KEY RESPONSIBILITES OF MAINTENANCE ELECTRICAL FOREMAN :
Responsible for the maintenance of electrical equipments in Jet Fuel , Diesel and Gas underground storage facilities. Machineries used in drilling operations such as Tamrock Drill Rig , Combi Machines , Rock bolting Machines , Platform etc. Machineries that are use for drilling of Power Generation Tunnels , Service Area tunnels , Lubrication Area tunnels , Pump Room Tunnels , Air Outlet Tunnels , Cavern Tunnels , Cable Area tunnels , Inspection Rooms tunnels , Fuel Loading Tunnels to include 11 kilometer Pipeline tunnels.
Maintenance of Ring system Power Distribution in underground areas 13.8KV, Distribution boxes for Motor pumps , 250 HP Ventilation Motors in underground areas plus lighting system. Supervised monthly servicing of
Electrical equipment’s used in drilling operations to ensure smooth and trouble free drilling operations in underground tunnels. To record all spare parts materials updated for future references when ordering materials.
SKILLS :
1. Permit to Work System( LOTO Operations , Constructions , Commissioning and Operation )
2. Electrical Engineer / Supervisor with core competencies in construction, commissioning and operations.
3. Results focused with demonstrated ability to meet schedules safely within budget.
4. Ability to handle multiple assignments with focused in meeting deadlines.
5. Good practice of HSE rules and regulations, developing work breakdown schedules.
6. Ability to adapt to and grasp concepts of any type of process and associated equipment’s.
7. Good eye for details well organized skilled setting priorities.
8. Able to identify, analyzed and solve problems.
9. Computer application experienced with Microsoft such as office , excel , outlook , words and power Point and internet usage.
10. Exceptional communication skills along with the ability to lead and be part of the team.
11. Able to read P&ID / SLD understand Risk Assessments.
12. Provide regular audits of Permit to Work System to ensure compliance with the project procedures and safe work practice.
13. Knowledge of Quality Control System, familiar with engineering standards.
14. Ability to assess work risk before commencing to work and have safe work practice.
15. .Safety practice procedures and implementation using my theoretical knowledge of being a Registered Safety Officer.
16. Reviewing risk assessment attach in permit application to make sure risk are eliminated while performing the task. Regular site inspection to check policies and procedures are properly implemented. Continuously monitors the work environment especially works perform under specific permit to work requirements.
Accreditations/Affiliations
Member – Association of Safety Professional Philippines.
Member – Filipino Health and Safety Practitioner Group
Education & Qualifications
College : Mindanao State University ( IIT )
: Iligan City, Philippines
: Bachelor of Science in Industrial Technology major in Electrical Technology.
: March 28 , 1976 – Graduated
High School : La Libertad National High School Before La Libertad Brgy High School
: Poblacion La Libertad , Zamboanga del Norte , Philippines
: March 16 , 1972 – Graduated
Primary : Manalac Community School
: San Agustin , Sapang Dalaga , Misamis Occidental , Philippines
: March 21, 1967 – Graduated
Certfified OSHA : General Industry for Construction Safety and Health Rodech International Safety ( Accredited by IBOEHS )
Cebu City , Philippines
Professional License : Registered Safety Officer Licensed No. 2415
: International Board of Environmental Health and Safety (IBOEHS )
: Arizona, Tucson, USA.
NEBOSH IGC : International General Certificate NEBOSH IGC
